New Page 0

Here are the summaries for maintaining these bikes. First, the relevant torques. I use Zinn's Art of Road Bike Maintenance, but their torques are very approximate, so here's a list across manuals.

Component Torque

Campagnolo

Bottom Bracket 70 Nm (51.6 lb-ft) or if too tight, thread lock the right side and torque to 30 Nm

Crank bolt 32-38 Nm (236-281 lb-ft)

Chain ring fixing bolt 8 Nm (5.9 lb-ft)

Sprocket Lock ring 50 Nm (36.9 lb-ft)

Brake cable clamping screw 5 Nm (3.7 lb-ft)

Brake nut 10 Nm (7.4 lb-ft)

Ergopower securing screw 10 Nm (7.4 lb-ft)

Rear derailleur frame securing screw 15 Nm (11.1 lb-ft)

Rear derailleur cable clamping screw 6 Nm (4.4 lb-ft)

Front derailleur cable clamping screw 5 Nm (3.7 lb-ft)

Crank Brothers Eggbeater Cleat B0lts 4-5 Nm (40-50 lb-inch)

Speedplay X-1 Layer 1 Cleat Bolts 35 lb-inch

Layer 2 Cleat Bolts 25 lb-inch

Here are some of the short cuts to the manuals online for these parts. When I get enough disk space on my hoster site I'll actually copy these so you don't have to depend on these manufacture sites being up.